Packaging Division

• Conduct quality checks on incoming raw material and sub-materials as identified
• Collect sufficient information for raising material quality complaint to suppliers
• Perform strength test and report testing as required by customers
• Perform lab tests to assisting the investigations relating to quality issues
• Report on non-adherence pertaining to quality matters by the supplier
• Mastercard checking
• Test report properly filling in the laboratory
• Any other assignment related to quality as and when required by QA Manager/QA Controller

• Diploma or SPM with 3 years working experience in manufacturing environment. Those with experience in printing industry are encourage to apply
• Knowledge of ISO 9001 requirement and systematic problem solving technique
• Computer literate
• Good interpersonal and communication skill

BACK

• SAP – MM/PM/FICO
• ABAP Programming
• ISO documentation and Management
• Maximize

• A Bachelor’s Degree
• At least 2 – 4 years of working in SAP system environment.
• Prior manufacturing business operations experience will be an advantage
• Recognition as a subject method expert in a functional/ technical area such as FICO/ SD/ MM/ BASIS/ PM preferably in a consulting environment with integration knowledge to multiple functional/ technical areas
• Ability to analyse complete complex business design for gap/ interfaces and configure system to user requirements
• Qualities such as good communication and presentation skills, confidence, and the ability to interact with people of all level are prerequisites
• Strong analytical skills and attention to detail

BACK

• To provide technical support internal & external promoting our high graphic printing innovative design
• To arrange for technical meting when there is high graphic job
• To coordinate with plate supplier on high graphic printing and network
• To follow up on the initial production for high graphic printing
• To ensure all the reports are documented and properly filed

• Preferably diploma or degree holder or minimum 2 years working experience in similar field
• Good communication & writing skills
• Good analytical skills in problem solving
• Able to plan, delegate and lead a team of subordinates
• Computer literate
• Good personality

BACK

• Carry out periodical checklist for preventive maintenance
• Assist other fitters and supervisor to repair machine or attend breakdown
• Need to be responsive to production complaint and rectify the problem as soon as possible
• Work in team until the job being complete
• Be responsible to arrange the manpower during the absence of supervisor or asst supervisor to support daily production

• Must have a least 5 years experience in machine maintenance
• At least Diploma in Mechanical Engineering with some fitting skills, welding and knowledge on bearings and rotating equipment. Experience in preventive maintenance is essential. A supervisor skill is needed
• Must be able to write and speak in English and Malay.

BACK

• Achieve monthly sales targets given
• Measure customer performance allocated
• Identify customer’s monthly forecast
• Sample development coordination such as submission of artwork, printed sample to customer
• Liaise with sales coordinator, planner, production, QA and warehouse on all customers’ development to ensure customer’s requirements are met
• Perform debt collection
• Make internal quality decisions for internal quality rejects

• Diploma / Degree holder, preferably in Marketing
• Minimum 2 years experience in sales/ marketing of industrial products
• Strong interpersonal and customer service skills
• Computer literate
• Good command of English, Chinese and Bahasa Malaysia
• Possess own transport

BACK

• Prepare daily payment
• Data entry for accounts payable
• Journals entry

• LCCI or Diploma in Accounting
• With or without experience

BACK

• Downtime prevention
• Cost improvement
• Maintenance trouble-shooting
• Implementation of effective preventive maintenance programs

• Possess a Degree from a reputable university in Mechanical Engineering
• Possess at least 3 years experience in manufacturing with strong capabilities in maintenance preferably in heavy industries or related industries
• Fresh Graduate with the motivation and drive are also encouraged to apply

BACK

• Overall supervision on plant maintenance for instrumentation and control, including preventive maintenance
• Carry out plant expansion and improvement project
• Work on shift

• Degree or Professional qualification, preferably in Electrical, Electronics Engineering
• More than 2 years working experience in related field
• Age, 21 years old and above

BACK

• Leading a project team for contract packaging or automation projects
• New project development and proposal preparation
• Providing internal operation and technical support
• Development of new product

• Possess a Degree / Masters from a reputable university in Mechanical/ Electrical / Industrial or related Engineering fields
• Candidates need to possess minimum 1 -2 years experience, preferably in packaging industry
• Fresh graduates are encouraged to apply

BACK

• Check all the rolls sizes before scan into the bar code terminal
• QC check sheets and log sheets being check daily
• Proper labelling for every stack
• Segregate all the waste from good stack
• Machine cleaning before and after production

• Minimum SPM
• Able to speak and write in English
• Able to work shift

BACK

Paper Division

• Degree in Finance / Accounting, ACCA, CIMA, CPA or any equivalent professional qualification
• Proven track record in relevant functional area, preferably in a SAP environment
• For Accountant position, you must have more than 5 years experience
• Relevant work experience are : periodic review of accounting system and internal control procedures; timely preparation and review of monthly management report, quarterly and annual statutory audit; liaison with external parties i.e. auditors, tax agents and bankers

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Finance/Accountancy/Banking or equivalent
• Required skill(s): Financial accounting, Management accounting, ACCA
• Preferably skill(s): Knowledge of SAP accounting
• Required language(s): English, Bahasa Malaysia
• Preferred language(s): Chinese
• At least 3 year(s) of working experience in the related field is required for this position
• Applicants must be willing to work in Banting
• Applicants should be Malaysian citizens or hold relevant residence status
• Preferably senior executives specializing in Finance - General/Cost Accounting or equivalent
• 2 Full-Time positions available

BACK

• To monitor all works carried out by shift technician
• To report to Assistant Supervisor for any major breakdown
• Attend to work request issued by other department
• Attend to and support production on equipment failure
• Record daily activities in Instrument Daily Report. Machine downtime incidents should be recorded with full detail

• Certificate in AO Chargeman
• At least 2 years experience in Industry
• Able to work shift

BACK

• To collect and analyze vibration data from the plant machinery
• To generate daily report with the purpose of highlighting machine problems to superior
• To follow up on machine problems until repair/rectification is performed
• To perform alignment of machinery (shaft alignment)
• To generate monthly machine alignment report.· To check and repair minor vibration/alignment equipment

• Education level: Diploma/Certificate/STPM/SPM, preferably from technical background
• Computer literate
• Working experience in plant maintenance especially vibration technology but not compulsory

BACK

• Downtime prevention
• Cost improvement
• Maintenance trouble-shooting
• Implementation of effective preventive maintenance programs

• Possess a Degree from a reputable university in Mechanical Engineering
• Possess at least 3 years experience in manufacturing with strong capabilities in maintenance preferably in heavy industries or related industries
• Fresh Graduate with the motivation and drive are also encouraged to apply

BACK

Genting Sanyen Malaysia

• Mengawal keselamatan kompleks Genting Sanyen iaitu keluar masuk pekerja, pelawat, kontraktor, kenderaan, barangan syarikat dan harta benda syarikat meliputi perimeter sekelilingnya.

• Berpengalaman dalam pengawal keselamatan
• Boleh berkomunikasi dan membuat laporan bertulis
• Boleh bekerja shif

BACK

Sahabat Alam

• Establishment and maintenance of relationship with distributors dealers, agents, architects by providing customer service support
• Perform sales activities and promotions
• Provide technical expertise for specialized building products

• Degree from a reputable university in engineering field / related fields
• Possess good scholastic achievements and proven track record in manufacturing or relevant industries
• Fresh graduates are encouraged to apply
• Strong interpersonal and customer service skills
• Computer literate
• Good command of English, Chinese and Bahasa Malaysia
  Possess own transport

BACK

 
[  ORGANISATION | DIVISIONS | COMMUNITY SERVICE | MEDIA | CAREERS | CONTACTS  ]